SLV D30 Class D Amplifier

Description

Power Rating @8ohm – 2x3000w

Power Rating @4ohm – 2x5100w

Power Rating @2ohm – 2x7140w

Power Rating @8ohm/Bridge – 10200w

Power Rating @4ohm/Bridge – 14280w

Frequency Responce – 20Hz-20kHz,(1w @ 8ohms,+-0.5dB)

THD – <0.5%,20Hz-20kHz

IMD – <0.05%

Slew Rate – 50 V/Us@8ohm

Damping Factor – >5000 @ 20-200 Hz @8ohm

Gain Senstivity – 32dB/35dB/38dB/41dB

Alternating Current Power Supply

Power                                                       PFC Power

Rated power demand                           100-240 v +10% 50/60 Hz

Operation voltage                                 90v-270v

Power correction factor cos                >0.95 @ >500 W

Standby                                                   47w      0.8A      47W      0.8A

 

Temperature

Environment temperature                   0 – 45C / 32-113 F

Cooling system                                       Tunnel through cooling system

 

Performance

Frequency Response                             20 Hz – 20 kHz (1 W @ 8 +0.5 dB)

Signal to Noise Ratio                             >110dBA (20 Hz – 20 kHz, A weighted)

Crosstalk                                                 >66 dB @ 1 kHz

Input Impedance                                  10 k balanced

Total Harmonic Distortion (THD)       <0.5% from 1 W to full power (Typing value <0.05%)

Intermodulation Distortion (IMD)      <0.5% from 1 W to full power (Typing value <0.05%)

Damping Factor (8 ohms)                   >5000 @ 20-200 Hz

Slew Rate                                                50 V/us @ 8 ohms

 

Front Panel

                                                                One PCS Green LED: the input signal of XLR > -40dB;

Four pieces Green LED:

Indicator LED/per channel                 display the output signal (-20db, -10dB, -5dB,-3dB) of SPEAKON

1 piece dual LED (Yellow and Red):

                                                                Protective state/ Clip state/ Over heat/ Over load

1.Display per channel operation mode.

Mono mode, Bridge mode and Stereo mode;

LED Screen                                               Display the temperature of the equipment

The device turns on protective state,

And the temperature of the equipment > 75*C;

Power Switch                                                     Press “I”  -on; Press  “o”   -off .

Two pieces dust-proof cotton.

Dust-proof                                                         it can take off to clearn from the bottom of front pannel

Application

4 Channel; One balanced XLR (with lock) female per channel;

Signal in-connection                    2 Channel; One balanced XLR (with lock) female

And one balanced xlr male per channel.

Signal out-connection             One SPEAKON per channel connect to loudspeakers

Fixed to the device, and the CSA (cross sectional area) of the cord is 3 x 2.5mm,

Power cord                                                 and the cord Is 1.5 meters long.

Multiple- functions Switch        Two Sensitivity Switches, one Mode Switch and one Clip Switch.

 

Structure

Dimensions                                    482x44x470mm3

Net weight                                     12kg

Packing size                                   580x580x116mm3

Shipping weight                             14kg